Production in CO.DI.TRA. is completely managed internally, an aspect that translates into important technical and commercial advantages:
Control of each stage of production;
Optimal management of priorities and urgencies;
Dimensional flexibility of the manufactured products
(it is possible to make changes in shape);
Possibility of customization of chemical analysis and heat treatments;
Improved microstructures
(forging, cross rolling and ad hoc heat treatments).
For CO.DI.TRA. "MADE IN ITALY" is not simply a slogan but a pride to show. Each product realized is entirely made in Italy and manufactured internally, only in this way the entire production process is monitored.
The products according to drawing are obtained from high quality alloy steel, processed in electric furnace, vacuum degassed and bottom poured into the ingots, using a proper chemical analysis. The material is then rolled or forged according to the final needs.
The completely "IN-HOUSE" production takes place with modern systems and machinery such as oxy-cutting machines, CNC work centers and grinding facilities managed by CAD-CAM systems, 100% controlled heat treatments through modern instruments in furnaces and tanks of the latest conception, all supported by modern digital technology.
Every single product is heat treated, this means that the mechanical characteristics are significantly higher (thanks to the greater homogeneity of the structure), with better performance in exercise.
CO.DI.TRA Steel | Type | Property | App. Field |
---|---|---|---|
CDT1100 | Ledeburitic Steel with Cr Mo V | Cold work steel, very high wear resistence, high hardness (HRC>60), and good toughness. | Blades, pletes and bars, spare parts subjected to high abrasive wear |
CDT900 | Martensitic steel with Ni Cr Mo V | Special steel with high percentage of Ni, Cr, Mo and V, characterized by an exceptional compressive strength, unit with a very high toughness value. 48 Blades for scrap shears and heavy- duty applications | |
CDT700 | Martensitic steel with Ni Cr Mo V | Special steel with Ni, Cr, Mo and V steel, characterized by high wear resistance and excellent toughness. Excellent hold of the cutting shape. 50 Blades for shredder, armoured plates corazze, spare parts subjected to wear | |
CDT650 | Martensitic steel with Ni Cr Mo V and Si | Acciaio speciale al Ni, Cr, Mo e V, caratterizzato da una elevata resistenza a usura e buona tenacità. Ottima tenuta del filo di taglio. 50Slotted and blind plates for diaphragms, armoured plates and heavy-duty wear resistance parts | |
CDT600 | Martensitic steel with Ni Cr Mo V e Si | Special steel with Ni, Cr, Mo and V steel, characterized by high wear resistance and excellent toughness. Excellent hold of the cutting shape. 50 Blades for shredder, armoured and liner plates, slotted and blind plates for diaphragms, spare parts subjected to wear | |
CDT500 | Martensitic steel with Ni Cr Mo (B) | Special steel with Ni, Cr, Mo e B, characterized by high wear resistance and excellent toughness (also at temperature under -40°C). Excellent temprability. 44Slotted and blind plates for diaphragms, armoured and liner plates in extreme shox situation, hammers, anvils, sieves, grate bars, spare parts subjected to wear | |
CDT52 | Martensitic steel with Si Cr e Ni | Special steel with Si, Cr, and Ni, characterized by high wear resistance and high yield strength. 50Blades for shredders and springs. | |
CDT300 | Sorbitic steel Mn Cr +S | Good workability. 280Mould for plastic materials | |
CDT200 | Structural steel | Tempered and quenched structural steel with high strength and high weldability. | Particolari macchina, traverse e spalle presse, carpenterie saldate |
CO.DI.TRA. has three automatic CN flame cutting systems, with cuts up to 700mm thick with excellent definition.
The department has a modern and equipped workshop, configured with:
- CN machining centers for precision mechanical machining;
- CN tangential adjustments for finishes after hardening;
- partner mechanical workshops for complementary processes.
It is the main and fundamental phase for obtaining performing products in operation where the uniformity of the structure and therefore of mechanical characteristics is a primary importance:
- latest generation heat treatment furnaces, controlled by PLC with dimensions up to 7.5m x2.5m;
- quenching tanks with water and polymeric solution, equipped with agitation
- Hardness tests;
- Manual Ultrasound Analysis;
- Visual and dimensional;
- Penetrant liquids;
- Chemical analyses.